Product introduction: magnetic force pump use six pay attention to the matter

2015-09-14 16:44:52 Browse:528
Product introduction: magnetic force pump use six points for attention 
(1) for magnetic pump bearing cooling and lubrication is established by the conveying medium, so the absolute ban on idling, avoid blackouts and start in the middle of the work at the same time by time and space load operation. 
(2) in the medium to be delivered, if containing solid particles, the pump inlet to add filter: such as containing ferromagnetic particles, need to add magnetic filter. 
(3) the pump in use environmental temperature should be less than 40 ℃, the motor temperature rise shall not exceed 75 ℃. 
(4) by transmission medium and its temperature should be in the range of allowable pump material. The use of engineering plastic pump temperature < 60 ℃, the use of metal pump temperature < 100 ℃, conveying suction pressure no greater than 0.2 MPa, the maximum working pressure of 1.6 MPa, the density is not greater than 1600 kg/m3, viscosity is not greater than 30 x10-6 m2 / S does not contain the liquid of hard particles and fibers. 
(5) for conveying liquid medium for easy crystallization precipitation, should be timely cleaning, after using row net fluid inside the pump. 
(6) magnetic pump normal operation after 1000 hours, should overhaul bearing and end ring wear and tear, and replace the unfavorable reoccupy wearing parts.